Search

12 litre plastic poultry feeder. Can be suspended and height adjustable in 3 positions. The bottom plate has a diameter of 40 cm. Thanks to the protective grid, the feed cannot be scraped out. It can be lifted from the ground level with a 4-piece lifting set, so that the poultry cannot easily get th..

22 litres plastic poultry feeder. Can be suspended and height adjustable in 3 positions. The lower plate has a diameter of 48 cm. Thanks to the protective grid, the feed cannot be scraped out. Can be lifted from the ground level with a 4-piece lifting set to prevent poultry from easily getting the f..

30 litre plastic poultry feeder. For larger flocks, it simplifies the watering of poultry. 3-legged. recommended only for birds that can reach the plate at a height of about 20 cm. Not suitable for small chicks...

9 litre plastic poultry feeder. Can be suspended and height adjustable in 3 positions. The bottom plate is 35 cm in diameter. Thanks to the protective grid, the feed cannot be scraped out. It can be lifted from the ground level with a 4-piece lifting set to prevent poultry from easily getting the fe..

9 litre plastic poultry feeder. Can be suspended and height adjustable in 3 positions. The bottom plate is 35 cm in diameter. Thanks to the protective grid, the feed cannot be scraped out. It can be lifted from the ground level with a 4-piece lifting set to prevent poultry from easily getting the fe..

25litre plastic poultry feeder. For larger flocks, it simplifies the watering of poultry. 3-legged. recommended only for birds that can reach the plate at a height of about 20 cm. Not suitable for small chicks...

20 litres plastic poultry feeder. Can be suspended and height adjustable in 3 positions. The bottom plate has a diameter of 45 cm. Thanks to the lamellas, the feed cannot be scraped out. It can be lifted from the ground level with a 4-piece lifting set, so that the poultry cannot easily get the feed..

20 litres plastic poultry feeder. Can be suspended and height adjustable in 3 positions. The bottom plate has a diameter of 45 cm. Thanks to the lamellas, the feed cannot be scraped out. It can be lifted from the ground level with a 4-piece lifting set, so that the poultry cannot easily get the feed..

Feet set of 4 feet for poultry feeders and feeders. Can be used for 12 and 22 litre plastic feeders and 10 and 15 litre bayonet lock drinkers...

18 litre chubby, for those who are tired of tipping and bayonet-locked drinkers. Here you don't have to bother with anything but refilling the bucket and the float at the bottom controls the water level. The bowl is raised so that the water doesn't get dirty easily. Assembly is simple. The bucket is..

18 litre poultry feeder for those who are tired of tipping and bayonet-locked drinkers. Here you don't have to bother with anything but refilling the bucket and the float at the bottom controls the water level. The bowl is raised so that the water doesn't get dirty easily. Assembly is simple. The bu..

8 litres capacity galvanized poultry feeders. Can be suspended and height adjustable in 3 positions. The lower plate is 30 cm in diameter...

1.5 litre gravity poultry feeder. Best for watering chicks due to its very low water level. Made of good quality plastic. The bottom and top fit on top of each other, not just stacked on top of each other...

40 litre capacity galvanized poultry feeders. Due to its large size, it is recommended for feeding larger flocks. For outdoor use, a rain protection flange is available...

Weight valve for poultry watering. High quality German LUBING, not the Chinese ALIBABA miracle everyone complains about. Installation is extremely simple. Just drill an 11 mm diameter hole in the 22 x 22 mm tube and push it in. No need to bother with the threads and the sealing...

Automatic poultry feeder bell. With spring valve. With 2 m hose, starter, which can be shut off !!!, cord, so with all the accessories necessary for its installation. It works properly at a pressure of 0.3 bar, so if the farmer wants to connect it to mains water, it is necessary to install a pressur..

30 cm long chickfeeder trough made of high quality plastic. For chicks and quails...

50 cm long plastic poultry feeding trough...

22 litre capacity galvanized poultry feeders. It can be suspended and its height can be adjusted in 3 positions. 40 cm diameter bottom plate...

Poultry waterer with weighted valve for watering quails, chicks and hens. The screw-on elbow element makes it very easy and quick to install on the cage. It makes the construction of watering systems very easy...

1 kg capacity plastic chick and bath feeder. Practical, space-saving, quality feeder for feeding chicks and quails. It also fits in cages...

30 cm long chick feed trough made of galvanized sheet. For chicks and quails...

50 cm long chick feed trough made of galvanized sheet. For chicks and quails...

30 cm long chickfeeder trough made of galvanized sheet with 18 holes. The top can be pulled off. For chicks, quails...

50 cm long chickfeeder trough made of galvanized sheet with 24 holes. The top can be pulled off. For chicks, quails...

A useful part of a pet watering system is the drip tray, which catches water dripping from the weight valve. This size is recommended for adult poultry. Installation is very simple, just snap it onto the 22 x 22 mm plastic tube...

Poultry watering systems use a drip tray to catch water dripping from the weight valve, so chicks and poultry can drink from it. It is very easy to install, just snap it onto the 22 x 22 mm plastic tube...