Poultry waterer

30 litre plastic poultry feeder. For larger flocks, it simplifies the watering of poultry. 3-legged. recommended only for birds that can reach the plate at a height of about 20 cm. Not suitable for small chicks...

25 litres capacity galvanized poultry feeder. For larger flocks, it simplifies the watering of poultry. 3-legged. recommended only for birds that can reach the plate at a height of about 20 cm. Not suitable for small chicks. Water does not algae in it, easy to keep clean...

25litre plastic poultry feeder. For larger flocks, it simplifies the watering of poultry. 3-legged. recommended only for birds that can reach the plate at a height of about 20 cm. Not suitable for small chicks...

Feet set of 4 feet for poultry feeders and feeders. Can be used for 12 and 22 litre plastic feeders and 10 and 15 litre bayonet lock drinkers...

Poultry feeder with bayonet lock, 15 litres, plastic. Can be ordered with elevating legs for an extra £500, and also in a capped version with a bottom pouring opening. You can select these from the drop-down menu...

10 litre plastic poultry feeder with bayonet lock. Can be ordered with elevating legs for an extra £500 and bottom pouring cap version. Use the drop down menu to select which version you would like to order. The version with bottom cap makes it easier to fill the drinker...

5 litre capacity plastic poultry feeder with bayonet lock. Fitted with chick protection grid. Can be used from the first days of life throughout the entire life cycle...

18 litre chubby, for those who are tired of tipping and bayonet-locked drinkers. Here you don't have to bother with anything but refilling the bucket and the float at the bottom controls the water level. The bowl is raised so that the water doesn't get dirty easily. Assembly is simple. The bucket is..

18 litre poultry feeder for those who are tired of tipping and bayonet-locked drinkers. Here you don't have to bother with anything but refilling the bucket and the float at the bottom controls the water level. The bowl is raised so that the water doesn't get dirty easily. Assembly is simple. The bu..

1.5 litre gravity poultry feeder. Best for watering chicks due to its very low water level. Made of good quality plastic. The bottom and top fit on top of each other, not just stacked on top of each other...

Fuel floating valve for pressure relief tank or for some drinkers. It can be used to turn any tank, can or bucket into an automatic drinker or pressure reducing tank for drinking systems. It can be connected to mains water...

Automatic, level-controlled so-called Easy Fix ( easy to install) teat drinker. Made of premium plastic and stainless steel. With its spring hooks it can be mounted on the cage in 1 second. The outer enclosed part has a float to regulate the water level. Inside is the drinking part. The whole drinke..

Weight valve for poultry watering. High quality German LUBING, not the Chinese ALIBABA miracle everyone complains about. Installation is extremely simple. Just drill an 11 mm diameter hole in the 22 x 22 mm tube and push it in. No need to bother with the threads and the sealing...

1 litre plastic drinker with weight valve. Can be hung on the outside of the cage. It can be used for watering chicks, quails and other poultry, a simple and practical solution...

Automatic poultry feeder bell. With spring valve. With 2 m hose, starter, which can be shut off !!!, cord, so with all the accessories necessary for its installation. It works properly at a pressure of 0.3 bar, so if the farmer wants to connect it to mains water, it is necessary to install a pressur..

Poultry waterer with weighted valve for watering quails, chicks and hens. The screw-on elbow element makes it very easy and quick to install on the cage. It makes the construction of watering systems very easy...

1 litre plastic drinking glass. Can be hung on the outside of the cage. Can be used for watering chicks, quails and other poultry, a simple and practical solution...

20 cm and 25 cm diameter warming sheet for poultry feeders. With the cold frosty mornings comes a problem that affects many farmers, the freezing of waterers. This can be prevented with these low consumption heating sheets. They can also be used for other purposes, for example, I put them under the ..

A useful part of a pet watering system is the drip tray, which catches water dripping from the weight valve. This size is recommended for adult poultry. Installation is very simple, just snap it onto the 22 x 22 mm plastic tube...

Poultry watering systems use a drip tray to catch water dripping from the weight valve, so chicks and poultry can drink from it. It is very easy to install, just snap it onto the 22 x 22 mm plastic tube...

Lattice feeding and watering tray to facilitate feeding and watering of chicks. No litter material, shavings are carried into the feeder under the feeder. 50 cm in diameter...

Rubber pipe release for 22x 22 mm plastic pipe. The clamp can be fixed on the pipe by tightening the clamps. The clamp is not included...

45 cm long plastic feeding trough...

Rubber stoppers for 25 litre galvanized and 30 litre plastic drinkers...

Automatic plastic drinker for poultry, hens and chicks. The price of the drinker includes all the accessories necessary to disconnect the backbone wire from the drinker (rubber hose, starter, cord for suspension, S hook). The drinker has a diameter of 38 cm. It is operated by a spring-loaded valve. ..

Chairs with bottle holder. A very simple construction for watering chicks or quails...

2 litre stainless steel level dispenser. Wall-mountable automatic drinking bowl, connectable to a mains water system. Suitable for watering many types of animals. They can't chew it and the weather won't eat it because it's made of stainless steel...