Search

30 litre plastic poultry feeder. For larger flocks, it simplifies the watering of poultry. 3-legged. recommended only for birds that can reach the plate at a height of about 20 cm. Not suitable for small chicks...

25 litres capacity galvanized poultry feeder. For larger flocks, it simplifies the watering of poultry. 3-legged. recommended only for birds that can reach the plate at a height of about 20 cm. Not suitable for small chicks. Water does not algae in it, easy to keep clean...

25litre plastic poultry feeder. For larger flocks, it simplifies the watering of poultry. 3-legged. recommended only for birds that can reach the plate at a height of about 20 cm. Not suitable for small chicks...

Feet set of 4 feet for poultry feeders and feeders. Can be used for 12 and 22 litre plastic feeders and 10 and 15 litre bayonet lock drinkers...

Poultry feeder with bayonet lock, 15 litres, plastic. Can be ordered with elevating legs for an extra £500, and also in a capped version with a bottom pouring opening. You can select these from the drop-down menu...

10 litre plastic poultry feeder with bayonet lock. Can be ordered with elevating legs for an extra £500 and bottom pouring cap version. Use the drop down menu to select which version you would like to order. The version with bottom cap makes it easier to fill the drinker...

18 litre chubby, for those who are tired of tipping and bayonet-locked drinkers. Here you don't have to bother with anything but refilling the bucket and the float at the bottom controls the water level. The bowl is raised so that the water doesn't get dirty easily. Assembly is simple. The bucket is..

18 litre poultry feeder for those who are tired of tipping and bayonet-locked drinkers. Here you don't have to bother with anything but refilling the bucket and the float at the bottom controls the water level. The bowl is raised so that the water doesn't get dirty easily. Assembly is simple. The bu..

0.5 litre weight valve skinner. The drinker is hung on the outside of the cage with only the valve hanging into the cage. As the rabbit licks the valve, it lifts the valve and water drips out. Watering with this type is hygienic, with no dirt in the drinker. The drinker is made of high quality plast..

1 litre weight valve skinner. The drinker is hung on the outside of the cage with only the valve hanging into the cage. As the rabbit licks the valve, it lifts the valve and water drips out. Watering with this type is hygienic, with no dirt in the drinker. The drinker is made of high quality plastic..

1 litre weight valve skinner. The drinker is hung on the outside of the cage with only the valve hanging into the cage. As the rabbit licks the valve, it lifts it up and water drips out. Watering with this type is hygienic, with no dirt in the drinker. The drinker is made of high quality plastic, th..

Fuel floating valve for pressure relief tank or for some drinkers. It can be used to turn any tank, can or bucket into an automatic drinker or pressure reducing tank for drinking systems. It can be connected to mains water...

Weight valve self-tapping, screwable on cage with adapter, screws and "T" binder. The drinker can be fixed to the cage thanks to the screw-on design. For larger flocks, it is easier to build a watering system, which saves a lot of time. Watering is hygienic and easy to set up. The rabbits learn to u..

For the construction of a self-drinking, watering system with weight valve. The weight valve can be hung on the cage grid by means of a spring steel plate. For larger herds it is advisable to install a watering system. This will save a lot of time..

Automatic poultry feeder bell. With spring valve. With 2 m hose, starter, which can be shut off !!!, cord, so with all the accessories necessary for its installation. It works properly at a pressure of 0.3 bar, so if the farmer wants to connect it to mains water, it is necessary to install a pressur..

Poultry waterer with weighted valve for watering quails, chicks and hens. The screw-on elbow element makes it very easy and quick to install on the cage. It makes the construction of watering systems very easy...

Rodeless rabbit weight valve. Releases water when the weight is lifted. For building watering systems...

90 degree, so called "L" bend for the construction of 10 mm drinking systems...

3-branch, so-called "T" bend for the construction of a 10 mm drinking system...

4-branch cross hose branching bend for the construction of a 10 mm drinking system...

A useful part of a pet watering system is the drip tray, which catches water dripping from the weight valve. This size is recommended for adult poultry. Installation is very simple, just snap it onto the 22 x 22 mm plastic tube...

Poultry watering systems use a drip tray to catch water dripping from the weight valve, so chicks and poultry can drink from it. It is very easy to install, just snap it onto the 22 x 22 mm plastic tube...

Free hose converter. Converts 22 x22 mm hose to 10 mm hose...

Plastic starter for 10 mm drinking system. Just drill a 9 mm hole in a bucket, can or tank and fit this starter bung into the rubber hose of the drinking system. This is used in the 10mm system...

Rubber stoppers for 25 litre galvanized and 30 litre plastic drinkers...

Straight hose spigot for the construction of a 10 mm drinking system...

Automatic plastic drinker for poultry, hens and chicks. The price of the drinker includes all the accessories necessary to disconnect the backbone wire from the drinker (rubber hose, starter, cord for suspension, S hook). The drinker has a diameter of 38 cm. It is operated by a spring-loaded valve. ..