Search

Fuel floating valve for pressure relief tank or for some drinkers. It can be used to turn any tank, can or bucket into an automatic drinker or pressure reducing tank for drinking systems. It can be connected to mains water...

90 degree, so called "L" bend for the construction of 10 mm drinking systems...

3-branch, so-called "T" bend for the construction of a 10 mm drinking system...

4-branch cross hose branching bend for the construction of a 10 mm drinking system...

A useful part of a pet watering system is the drip tray, which catches water dripping from the weight valve. This size is recommended for adult poultry. Installation is very simple, just snap it onto the 22 x 22 mm plastic tube...

Poultry watering systems use a drip tray to catch water dripping from the weight valve, so chicks and poultry can drink from it. It is very easy to install, just snap it onto the 22 x 22 mm plastic tube...

Free hose converter. Converts 22 x22 mm hose to 10 mm hose...

Plastic starter for 10 mm drinking system. Just drill a 9 mm hole in a bucket, can or tank and fit this starter bung into the rubber hose of the drinking system. This is used in the 10mm system...

Straight hose spigot for the construction of a 10 mm drinking system...

90 degree elbows for 22 x22 mm plastic pipe They require the use of PVC glue...

10 mm end stopping plug to close unnecessary branches in the drinking system...

90 degree hose converter. Converts 22 x22 mm hose to 20 mm hose...

Free hose converter. Converts 22 x 22 mm hose to 20 mm hose...

T for IDOM 22 x22 mm plastic pipe.They require the use of PVC glue...

Rubber hose with 9 mm inner diameter for the construction of a 10 mm drinking system. The price refers to 1 meter...